| 16384001 Kaydon Slewing Ring Bearings | Dimension M:1.73 in; Grease Lubrication - T Seal:2400 rpm; Int Radial Clearance Reduction Min:0.0015 in; Int Radial Clearance Reduction Max:0.0020 in; C - Dynamic Load (Basic):49900 lb; Full Timken Part Number:DVF15K207SB; Adapter Sleeve Axial Movement Min:0.022 in; Oil Lubrication - B/C/O Seal:1300 rpm; Dimension L:3.20 in; Grease Lubrication - B/C/O Seal:1300 rpm; C0 - Static Load:54100 lb; Pre Install Clearance Max:0.0047 in; |
| XU08012 INA Slewing Ring Bearings | Preload level:7; f0:7.42; Db max:37.5 mm; Characteristic rolling element frequency, BSF:5.27 Hz; Min operating temperature, Tmin:-20 °C; Static load, C0:3.05 kN; Radial rigidity:132 N/µm; r1s min:0.3 mm; Size (mm):20x42x12; Nlim (grease):52,000 rpm; r1a max:0.3 mm; Mass:0.06 kg; Precision class:P4S; Axial rigidity:27 N/µm; Fatigue limit load, Cu:0.19 kN; ra max:0.6 mm; D1:37.05 mm; db min:24.5 mm; |
| 16335001 Kaydon Slewing Ring Bearings | D:100 mm; Limiting speed:4500 r/min; d:55 mm; Size (mm):55x100x33.3; r1 min.:1,5 mm; Basic dynamic load rating (C):55,9 kN; Bore Diameter (mm):55; Weight:1,1 Kg; Angle (α):32 °; Bearing number:3211-B-2RSR-TV; r2 min.:1,5 mm; C:33,3 mm; Outer Diameter (mm):100; Basic static load rating (C0):47,1 kN; B:33,3 mm; Width (mm):33,3; a:50 mm; |
| HT10-60P1Z Kaydon Slewing Ring Bearings | Angle:4 °; Weight:0,253 Kg; d1:40 mm; d:35 mm; Basic dynamic load rating (C):80 kN; C:20 mm; Width (mm):35; Size (mm):35x55x35; Bearing number:GEEW35ES; Bore Diameter (mm):35; B:35 mm; D:55 mm; Outer Diameter (mm):55; |
| MTE-324X Kaydon Slewing Ring Bearings | Width (mm):80; D:155 mm; Outer Diameter (mm):155; Coefficient of friction µ max.:0.2; Product Group:B04264; c1 min:0,2 mm; α ±8:20 °; Permissible sliding velocity v max.:2.5 m/s; Bore Diameter (mm):150; Bearing number:PCM 15015580 M; Size (mm):150x155x80; c2 max.:2.4 mm; Tolerance housing:H7; Category:Plain Bearings; Mass bushing:0.67 kg; Factor depending on material and bearing type KM:1900; |
| 16286001 Kaydon Slewing Ring Bearings | Cg - Geometry Factor8:0.1297; Reference Thermal Speed Rating (Grease):530; Design Unit:METRIC; D:540.000 mm; Y0 - ISO Factor4:2; Bearing Weight:194.500 Kg; B - Outer Ring Width:192.000 mm; C0 - Static Radial Rating:6170000 N; Cage Material:Brass; Y1 - ISO Factor5:2.98; d:300.000 mm; r - Outer Ring To Clear Radius2:4.000 mm; da - Inner Ring Backing Diameter:351.000 mm; Da - Outer Ring Backing Diameter:482.000 mm; |
| KH-125P Kaydon Slewing Ring Bearings | Basic static load rating C0:15.3 kN; s1:24.3 mm; Basic static load rating - C0:15.3 kN; Width (mm):39,5; Calculation factor f0:14; Bore Diameter (mm):72; d1 ≈:46.1 mm; d:36.512 mm; Mass complete bearing:0.42 kg; Mass bearing:0.42 kg; B1:39.7 mm; Basic dynamic load rating - C:25.5 kN; Fatigue load limit - Pu:0.655 kN; Recommended tightening torque for grub screw:7.4 N·m; Outer Diameter (mm):36,512; |
| 92-20 1091/1-37272 IMO Slewing Ring Bearings | Bearing Bore after Mounting (di):75.23 / 75.08; Outer Diameter (mm):80; Bore Diameter (mm):75; Bearing Outside Diameter, Nominal(Do):80.000; Bearing Length, Nominal (B):50.000; Wall Thickness (S3):2.430; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Average Clearance (Cd):0.1780; Shaft Size (ds) - 75 +0 / -0.046:75 +0 / 0.046; Lube Hole Dia. (dl):9.500; Material:Copper plated steel; OD Chamfer Length (Co):1.800; |